Engineering, 24.01.2020 04:31 kmisure
Prepare deflection angles for staking the curves in problem 2-2. in every example assume that sta. p. i. = 37+53.21. carry the results to the precision used in section 2-9. (a) set full stations. partial answers: sta. t. c. = 32+58.83; c. t. = 42+40.83; deflection t. c. to 33+00 = 0°20.58'.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Prepare deflection angles for staking the curves in problem 2-2. in every example assume that sta. p...
History, 23.04.2021 23:20
Advanced Placement (AP), 23.04.2021 23:20
Mathematics, 23.04.2021 23:20
Mathematics, 23.04.2021 23:20
Biology, 23.04.2021 23:20
Mathematics, 23.04.2021 23:20
Mathematics, 23.04.2021 23:20
Chemistry, 23.04.2021 23:20