subject
Engineering, 24.01.2020 21:31 dmart201

The seed crystal used for czochralski crystal growth is necked down to about 3 mm diameter to produce a dislocation-free crystal. use 2 x 10^6 g/cm2 as the yield strength of silicon at the growth temperature (the units are strange but correct assuming the gravitational constant of earth, etc.) and determine the maximum length of each ingot that can be supported by this neck if the ingots are 150, 200 and 300 mm diameter.
for the 200 mm diameter case, how many wafers can be produced (if the final wafer thickness is 725 mm).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
The seed crystal used for czochralski crystal growth is necked down to about 3 mm diameter to produ...
Questions
question
Mathematics, 13.02.2020 00:14
question
Mathematics, 13.02.2020 00:14
Questions on the website: 13722362