Engineering, 27.01.2020 20:31 grosst217
What is the a specific weight and b density of air at an absolute pressure of 730 kpa and a temperature of 28c
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 06.07.2019 03:30
Abrayton cycle operates with a regenerator on the air-standard with properties evaluated at 400 k. the tem- perature of the air entering the compressor is 350k while the temperature of the air exiting the compressor is 600 k. the temperature of the air entering the turbine is 1600 k. the overall cycle produced 600 kj/kg of net work out. assuming a regenerator effectiveness of 0.8, what is the temperature of the air before heat addition (combustion)? draw this process on a t - s diagram
Answers: 3
Engineering, 06.07.2019 04:30
Calculate the resolved shear stress on the (111)[011] slip system of a unit cell in an fcc nickel single crystal if a stress of 13.7 mpa is applied in the [001] direction of a unit cell.
Answers: 1
What is the a specific weight and b density of air at an absolute pressure of 730 kpa and a temperat...
Mathematics, 08.09.2021 07:00
Advanced Placement (AP), 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
History, 08.09.2021 07:00
Geography, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
Social Studies, 08.09.2021 07:00
French, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00
Mathematics, 08.09.2021 07:00