subject
Engineering, 28.01.2020 03:31 strawberrymochi1078

Primary u. s. interstate highways are numbered 1-99. odd numbers (like the 5 or 95) go north/south, and evens (like the 10 or 90) go east/west. auxiliary highways are numbered 100-999, and service the primary highway indicated by the rightmost two digits. thus, the 405 services the 5, and the 290 services the 90 given a highway number, indicate whether it is a primary or auxiliary highway. if auxiliary, indicate what primary highway it serves. also indicate if the (primary) highway runs north/south or east/west. ex: if the input is: 90 the output is: the 90 is primary, going east/west. ex: if the input is: 290 the output is: the 290 is auxiliary, serving the 90, going east/west ex: if the input is g here to search the 290 is auxiliary, serving the 90, going eas ex: if the input is: 0 or any number not between 1 and 999, the output is: 0 is not a valid interstate highway number. see wikipedia for more info on highway numbering lab 4.16.1: lab: interstate highway numbers activity labprogr- 1 import java. util. scanner; 2 3 public class labprogram public static void main(stringl] args) t scanner scnr new scanner(system. in); int highwaynumber; int primarynumber; 4 5 6 7 highwaynumber scnr. nextint(); 1e type your code

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Primary u. s. interstate highways are numbered 1-99. odd numbers (like the 5 or 95) go north/south,...
Questions
question
Social Studies, 12.10.2019 02:50
question
Mathematics, 12.10.2019 02:50
Questions on the website: 13722363