Engineering, 29.01.2020 02:41 pineapplequeen1912
You are using a strain gage connected to a wheatstone bridge (with battery of e = 5 v) to measure the force applied to a simple rectangular bar. the bar is 3 cm by 3 cm in cross section and stretched (along its length) from 0.3 m to 0.3002 m. assume a young's modulus of 69 gpa and a poisson's ratio of 0.3. a. calculate the axial stress. b. calculate the transverse strain (assume only stress applied is in line with the length) c. calculate the force applied d. you mounted two strain gages to the bar, but one has been rotated to be "inactive" (it serves as a temperature compensator, but it is sensitive to the transverse strain). the strain gages are in the same legs as problem 3 and balanced before strain (i. e., the output of the wheatstone bridge is 0 v in zero-strain conditions). both strain gages have a gage factor of 2 and all the nominal resistances are 120 n. what is the output voltage (ep) you measure taking the traverse strain calculated in problem 4b into account? hint: recall the equation for calculating the output voltage (ep) of the unbalanced wheatstone bridge (see lecture notes). then, consider resistance changes in r, and r4. to find the values ar, and ar4, use the definition e= ar/(fr). e. compare the voltage calculated in problem 4d to the one you would measure if you ignored the traverse strain contribution.
Answers: 1
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You are using a strain gage connected to a wheatstone bridge (with battery of e = 5 v) to measure th...
Mathematics, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
Chemistry, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
Advanced Placement (AP), 14.07.2019 06:30
History, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30
History, 14.07.2019 06:30
Mathematics, 14.07.2019 06:30