subject
Engineering, 10.02.2020 21:33 grace9874

Bruce wants to present to his client an architectural drawing that shows the exact details of the living room, kitchen, bedroom, and stairs in relation to other areas of the house. Which type of architectural drawing should Bruce use? A. electrical plan B. wall section in a detail drawing C. cutting-plane view D. plan view in a general plan E. section view in a general plan

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
Bruce wants to present to his client an architectural drawing that shows the exact details of the li...
Questions
question
History, 29.11.2021 22:30
question
Mathematics, 29.11.2021 22:30
question
Biology, 29.11.2021 22:30
question
Biology, 29.11.2021 22:30
Questions on the website: 13722363