Begin by writing the KVL equation for the mesh labeled i1i1 by setting the sum of all of the voltages around the mesh to zero. Construct the KVL equation for this mesh by setting the sum of the voltage drops around the mesh (in the direction of the mesh's current) equal to zero. Make sure each term in the equation is expressed in volts.

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Mention two examples each of the direct and indirect measurement of force.