Engineering, 11.02.2020 20:53 milkshakegrande101
The object below is to be cast from aluminum (a cube with a hollow conical volume). If you have problems reading the drawing, the cube side is 100 mm, the cone height is 60 mm and the cone base radius is 30mm. Aluminum data: Density = 2.7 g/cm3, Melting Temperature = 660 °C, Cs = Cl = 0.4 J/g.°C, Hf = 200 J/g, Determine:- The volume of the part to be cast (3 points),- The area of the part to be cast (3 points),- Required energy to heat the metal (3 points),- Solidification time function of the mold constant Cm
Answers: 3
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
The object below is to be cast from aluminum (a cube with a hollow conical volume). If you have prob...
Mathematics, 19.04.2021 15:40
Computers and Technology, 19.04.2021 15:40
Health, 19.04.2021 15:40
Mathematics, 19.04.2021 15:40
Biology, 19.04.2021 15:40
Mathematics, 19.04.2021 15:40
English, 19.04.2021 15:40
Mathematics, 19.04.2021 15:40
English, 19.04.2021 15:40