Engineering, 12.02.2020 03:18 madelyngv97

A rigid tank contains liquid water and water vapor with an initial total internal energy of 500 kJ. During the process over 1 minute, 900 kJ of energy are transferred into the system from a burner and 50 A of electrical current was supplied to the resistor at the voltage of 110 V. As a result, 800 kJ are transferred from water to the surrounding air.(a) What kind of work interaction is present in this process? Consider the walls of the rigid tank as the system.
(b) Is this process adiabatic?
(c) After this process the volume of the tank will change?
(d) Calculate the final internal energy of the water contained in the tank (neglect the energy stored in the tank walls).

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

A rigid tank contains liquid water and water vapor with an initial total internal energy of 500 kJ....

Questions