subject
Engineering, 13.02.2020 01:27 jazzwok

Different regions of the United States have different woothor patterns. Euroka, California and Middletown, Now Jersey are both
located on a coast at about the same latitudo. The map shows the location of the cities near 40'N latitudo, which is represented
by the dashod line.
Middletown
Pacific
Ocean
Atlantic
Ocean
Eureka has an averago July tomporaturo of 17°C (63°F) Middletown has an averago July tomperature of 28'C (82°F) If wind
patterns generally move from the west toward the east, why is Eureka so much cooler than Middletown in July?
O A. Land losos its heat slower than water, so Middletown receives hotter air than Euroka throughout the yoar including
during the summer months
OB. The Pacific Ocean contains more salt than the Atlantic Ocean, so colder ocean currents from the Pacific koep
Eureka's temperature lower than in Middletown
Euoroka is much further away from the Equator than Middletown is, so the cold air from the north koops the
tomperaturos lower
Ocean water remains cooler longer than land, so air from the ocean moving east toward Euroka koops tomporatures
lower than in Middletown
436 PM

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Different regions of the United States have different woothor patterns. Euroka, California and Middl...
Questions
question
Mathematics, 25.03.2020 06:26
question
Social Studies, 25.03.2020 06:26
Questions on the website: 13722360