subject
Engineering, 13.02.2020 20:00 kaaylon8285

The hydrolys is of esters fequently is catalyzed by acids. RCOOR' + H2O → RCOOH + R'0H As the above hydrolysis reaction proceeds, more acid is produced and the concentration of catalyst increases. This phenomenon, known as "autocatalysis is captured by the rate equation: Here ko is the rate constant in the absence of the organic acid that is produced by the [RCOORo 1 M [H2010 1M reaction. The initial/inlet concentrations are listed below: The rate constants are koー0.01 (Mh)", k1 = 0.20 M-2h-1. The reaction takes place in the liquid phase. (a) Cakculate the values of -TRCOOR, at fractional conversions of ester of xRCOOR 0,0.1,0.2,0.3,0.4,0.5,0.6,0.7.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
The hydrolys is of esters fequently is catalyzed by acids. RCOOR' + H2O → RCOOH + R'0H As the above...
Questions
Questions on the website: 13722360