Engineering, 14.02.2020 04:46 drhtgsehg6334
I want to use a 6061 aluminum alloy for a tie rod with a circular cross section. The yield strength of this alloy is 240 MPa, and the elastic modulus is 70 GPa.
1. If this tie rod has to hold a load of 20,000N, what is the minimum diameter of the tie rod needed to avoid yielding. Enter the answer in meters.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
I want to use a 6061 aluminum alloy for a tie rod with a circular cross section. The yield strength...
Questions
History, 23.07.2021 03:40
Mathematics, 23.07.2021 03:40
Chemistry, 23.07.2021 03:40
English, 23.07.2021 03:40
History, 23.07.2021 03:40
