Engineering, 14.02.2020 04:46 ellaemtagedeane
Natural gas with a specific gravity of 0.7 and flowing with a flowrate of 2 MMSCFD in a split pass coil line heater. Line Pressure and temperature (before the choke and the line heater) = 3000 psia, 100F. Well shut in pressure = 5000 psia Pressure after choke = 1500 psia.
a) Gas was heated hot enough so that it drops to hydrate temperature after the choke. What was the temperature it was heated to, before it enters the choke?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
You know the right answer?
Natural gas with a specific gravity of 0.7 and flowing with a flowrate of 2 MMSCFD in a split pass c...
Questions
Computers and Technology, 26.07.2019 06:30
Physics, 26.07.2019 06:30
History, 26.07.2019 06:30
Geography, 26.07.2019 06:30
History, 26.07.2019 06:30
Chemistry, 26.07.2019 06:30
English, 26.07.2019 06:30
Biology, 26.07.2019 06:30
Computers and Technology, 26.07.2019 06:30
