subject
Engineering, 14.02.2020 16:27 Laylahlettiere

G Double‑reciprocal, or Lineweaver–Burk, plots can reveal the type of enzyme inhibition exhibited by an inhibitor. Competitive inhibitors increase the K M without affecting the V max . Noncompetitive inhibitors decrease the V max without affecting the K M . Uncompetitive inhibitors decrease both the K M and V max . A Lineweaver Burk plot shows two lines representing the kinetics of an enzyme with and without inhibitor. The x-axis plots the inverse of the substrate concentration, and the y-axis plots the inverse of the reaction velocity. The x-intercept of the line with inhibitor is more negative than the line with no inhibitor. Both lines have the same y-intercept. Based on the Lineweaver–Burk plot, what type of enzyme inhibition is exhibited by the inhibitor?
competitive
noncompetitive
uncompetitive
cannot be determined

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
G Double‑reciprocal, or Lineweaver–Burk, plots can reveal the type of enzyme inhibition exhibited by...
Questions
question
Social Studies, 25.09.2019 23:50
Questions on the website: 13722359