subject
Engineering, 14.02.2020 17:12 widnickab

Radioactive wastes (k_rw = 20 W/m K) are stored in a spherical, stainless steel (k_ss = 15 W/m K) container of inner and outer radii equal to r_i = 0.6 m and r_0 = 0.7 m. Heat is generated volumetrically within the wastes at a uniform rate of q = 10^5 W/m^3, and the outer surface of the container is exposed to a water flow for which he = 1000 W/m^2 K and T_infinity = 25 degrees C.
Evaluate the steady-state inner surface temperature, T_s, o. Evaluate the steady-state inner surface temperature, T_s, i.
Obtain an expression for the temperature distribution, T(r), in the radioactive wastes. Express your result in terms of r_i, T_s, i, k_rw, and q.
Evaluate i temperature at r = 0.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
Radioactive wastes (k_rw = 20 W/m K) are stored in a spherical, stainless steel (k_ss = 15 W/m K) co...
Questions
question
Mathematics, 26.01.2021 03:50
question
Mathematics, 26.01.2021 03:50
question
Mathematics, 26.01.2021 03:50
question
Mathematics, 26.01.2021 03:50
question
Mathematics, 26.01.2021 03:50
Questions on the website: 13722363