Engineering, 14.02.2020 18:16 micknero
Design a PD controller so that the peak time of the PD-compensated system is reduced by a factor of 1.5 from the peak time of the gain-compensated system, and the damping ratio remains at 0.6. Determine the location of the compensator zero, calculate the corresponding overall gain KP and calculate the resulting s
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Design a PD controller so that the peak time of the PD-compensated system is reduced by a factor of...
Mathematics, 05.05.2020 14:17
Social Studies, 05.05.2020 14:17
Social Studies, 05.05.2020 14:17
Mathematics, 05.05.2020 14:17
Mathematics, 05.05.2020 14:17