A gas conatins 75.0wt% methane, 10.0% ethane, 5.0% ethylene, and the balance water
a) calculat...
Engineering, 15.02.2020 04:04 marcusajns
A gas conatins 75.0wt% methane, 10.0% ethane, 5.0% ethylene, and the balance water
a) calculate the molar composition of this gas on both wet and dry basis and the ratio (mol h2o/mol dry gas)
b ) if 100kg/h of this fuel is to be burned with 30% excess air, what is the required air feed rate (kmol/h)? how would the answer change if the combustion were only 75% complete?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Questions
Spanish, 28.06.2019 17:00
Mathematics, 28.06.2019 17:00
Social Studies, 28.06.2019 17:00
Social Studies, 28.06.2019 17:00
Biology, 28.06.2019 17:00
English, 28.06.2019 17:00
English, 28.06.2019 17:00
Mathematics, 28.06.2019 17:00
English, 28.06.2019 17:00
