subject
Engineering, 17.02.2020 21:02 kjhgfcvb5761

Air at 2.5 bar, 400 K is extracted from a main jet enginecompressor for cabin cooling. The extracted air enters a heatexchanger where it is cooled at constant pressure to 325 Kthrough heat transfer with the ambient. It then expandsadiabatically to 1.0 bar through a turbine and is dischargedinto the cabin. The turbine has an isentropic efficiency of80%. If the mass flow rate of the air is 2.0 kg/s, determine(a) the power developed by the turbine, in kW.(b) the rate of heat transfer from the air to the ambient, in kW.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
question
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
Air at 2.5 bar, 400 K is extracted from a main jet enginecompressor for cabin cooling. The extracted...
Questions
question
Geography, 23.04.2020 14:33
question
History, 23.04.2020 14:35
Questions on the website: 13722363