Engineering, 18.02.2020 02:30 emmie50

One of the National Academy of Engineering Grand Challenges for Engineering is Develop Carbon Sequestration Methods. The NAE defines carbon sequestration as "capturing the carbon dioxide produced by burning fossil fuels and storing it safely away from the atmosphere." The most promising storage location is underground, possibly in sedimentary brine formations. You are assigned to develop instrumentation to measure the properties of a brine formation, located 800 meters [m] deep.
Assume the instruments will feel an equivalent amount of pressure to the amount of hydrostatic pressure felt at the bottom of an 800-meter [m] high column of brine, with a specific gravity of 1.35.
1. To what hydrostatic pressure, in units of atmospheres [atm], must the instrumentation be built to withstand?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

One of the National Academy of Engineering Grand Challenges for Engineering is Develop Carbon Seques...

Questions