Engineering, 18.02.2020 04:50 rina62

Semi-conductors are made by adding impurities to silicon wafers. The silicon wafer is 0.1 cm thick and originally contains one phosphorus (P) atom for every 10 million Si atoms. After the diffusion process, there are 292 phosphorus atoms for every 10 million Si atoms at the top surface and the concentration at the bottom surface did not change. Calculate the concentration gradient in atomic percent/cm Note: The lattice constant of diamond cubic silicon is 5.4307 angstroms with 8 atoms per cell. The answer should have 3 decimals of accuracy.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

You know the right answer?

Semi-conductors are made by adding impurities to silicon wafers. The silicon wafer is 0.1 cm thick a...

Questions