subject
Engineering, 18.02.2020 21:34 jasondesatnick

One challenge for architects is that the design created today will require several years of implementation, verification, and testing before appearing on the market. This means that the architect must project what the technology will be like several years in advance. Sometimes, this is difficult to do.
a: According to the trend in device scaling historically observed by Moore’s law, the number of transistors on a chip in 2028 should be how many times the number in 2018? (You may assume a 40% increase in the number of transistors per year.)
b: The increase in performance once mirrored this trend. Had performance continued to climb at the same rate as in the 1990s, approximately what performance would chips have over the VAX-11/750 in 2028 (assume a 40% increase in performance per year)? You may assume that the speedup in the year 2003 over the VAX-11/750 is 6043x.
c: At the current rate of increase of the mid-2000s (assume 22% per year), what is a more updated projection of performance in 2028? You may assume that the speedup in the year 2010 over the VAX-11/750 is known to be 24,129.
d: What has limited the rate of growth of the clock rate, and what are architects doing with the extra transistors to increase performance?
e: The rate of growth for DRAM capacity has also slowed down. For 20 years, DRAM capacity improved 60% each year. If 8 Gbit DRAM was first available in 2015 and 16 Gbit DRAM was not available until 2019, what is the current DRAM growth rate.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
One challenge for architects is that the design created today will require several years of implemen...
Questions
question
Mathematics, 22.09.2021 03:10
question
English, 22.09.2021 03:10
question
Mathematics, 22.09.2021 03:10
question
Computers and Technology, 22.09.2021 03:10
Questions on the website: 13722363