subject
Engineering, 19.02.2020 21:42 reganleigh00

A rectangular swimming pool 50 ft long, 25 ft wide, and 10 ft deep is filled with water to a depth of 8 ft. Use an integral to find the work required to pump all the water out over the top. (Take as the density of water δ=62.4lb/ft3.)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 06.07.2019 03:10
Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c
Answers: 1
You know the right answer?
A rectangular swimming pool 50 ft long, 25 ft wide, and 10 ft deep is filled with water to a depth o...
Questions
question
Social Studies, 04.02.2022 17:40
question
Mathematics, 04.02.2022 17:40
question
Chemistry, 04.02.2022 17:40
question
English, 04.02.2022 17:40
question
Mathematics, 04.02.2022 17:50
question
Mathematics, 04.02.2022 17:50
Questions on the website: 13722362