subject
Engineering, 20.02.2020 04:22 darkghostmist

Convert the analog voltage E(t) = 2sin4πt mV into a discrete time signal. Specifically, use sample time increments of a. 1/8 second b. 1/5 second c. 1/3 second d. 1/21 second use a data set of 128 points. Plot 4 seconds of each series as a function of time. Discuss apparent differences between the discrete representations of the analog signal.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Convert the analog voltage E(t) = 2sin4πt mV into a discrete time signal. Specifically, use sample t...
Questions
question
Mathematics, 21.08.2019 07:00
question
Mathematics, 21.08.2019 07:00
Questions on the website: 13722367