2. A trapezoidal channel has a bottom width of 4 m and side slopes of 2:1 (H:V). If the flow rate is 50 m3/s at a depth of 3.6 m, report whether the flow is subcritical or supercritical. Also determine the alternate depth (for the same specific energy). Also determine the critical depth.

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false