Engineering, 21.02.2020 01:10 ttandkk
Determine the yield strength-to-density ratios (specific strength) in units of KN. m/kg for AISI 1018 CD steel, 2011-T6 aluminum, Ti-6AL-4V titanium alloy, and ASTM No. 40 gray cast iron.
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
Determine the yield strength-to-density ratios (specific strength) in units of KN. m/kg for AISI 101...
Mathematics, 05.10.2019 07:00
Chemistry, 05.10.2019 07:00
Mathematics, 05.10.2019 07:00
Business, 05.10.2019 07:00
Biology, 05.10.2019 07:00
Mathematics, 05.10.2019 07:00
Mathematics, 05.10.2019 07:00
Mathematics, 05.10.2019 07:00