Engineering, 21.02.2020 04:31 fansofboys
A confined aquifer has a specific storage of 1.8 x 10-5 /m. The porosity is 0.31, and the water compressibility is 4.5x10-10 /Pa. (A) What is the compressibility of the aquifer skeleton [5 pts]?b) For the aquifer skeleton compressibility you just calculated, what would the aquifer specific storage be if porosity were 50%.
c)What effect does the increasing porosity have on aquifer storativity? Why?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
A confined aquifer has a specific storage of 1.8 x 10-5 /m. The porosity is 0.31, and the water comp...
Questions
Mathematics, 28.06.2019 18:50
Chemistry, 28.06.2019 18:50
Health, 28.06.2019 18:50
Mathematics, 28.06.2019 18:50
Computers and Technology, 28.06.2019 18:50
History, 28.06.2019 18:50
Health, 28.06.2019 18:50
Mathematics, 28.06.2019 18:50
English, 28.06.2019 18:50
