Compare the A/R value above with a calculation that includes thermal bridging of stone- aggregate concrete floor joists penetrating the entire wall section to create an outdoor balcony, adding a 3rd parallel heat flow pathway. The total area of the floor joist penetrations is 15 sf. You can neglect the corresponding reduction in the areas of the framed wall.

What precautions should you take to prevent injuries when dealing with heavy loads?

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.