Engineering, 21.02.2020 19:14 tcham0201
Write a program that asks for the user’s height, weight, and age, and then computes clothing sizes according to the formulas:
Hat size = weight in pounds divided by height in inches and all multiplied by 2.9
Jacket size (chest in inches) = height times weight divided by 288 and then adjusted by adding 1/8 of an inch for each 10 years over the age of 30. (Note that the adjustment only takes place after a full 10 years. Thus, there is no adjustment for ages 30 through 39, but 1/8 of an inch is added for age 40.)
Waist in inches=weight divided by 5.7 and then adjusted by adding 1/10 of an inch for each 2 years over age 28. (Note that the adjustment only takes place after a full 2 years. Thus, there is no adjustment for age 29, but 1/10 of an inch is added for age 30.)
Use functions for each calculation. (Thus, write 3 functions.)
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
You know the right answer?
Write a program that asks for the user’s height, weight, and age, and then computes clothing sizes a...
Questions
Computers and Technology, 26.06.2019 17:50
Mathematics, 26.06.2019 17:50
Computers and Technology, 26.06.2019 17:50
Mathematics, 26.06.2019 17:50
History, 26.06.2019 17:50
Computers and Technology, 26.06.2019 17:50
Mathematics, 26.06.2019 17:50
