subject
Engineering, 21.02.2020 19:46 carminamtzb3725

Limit tests performed on a clay material indicate a LL of 67 % and a PL of 32 %. The hydrometer analysis is employed to determine the particle size, and the results indicate that 40 % in weight of the particle has diameter smaller than 0.002 mm. Calculate the activity (A) and indicate the probable type of clay mineral.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Limit tests performed on a clay material indicate a LL of 67 % and a PL of 32 %. The hydrometer anal...
Questions
question
Mathematics, 10.03.2021 19:50
question
Mathematics, 10.03.2021 19:50
question
Biology, 10.03.2021 19:50
Questions on the website: 13722367