Engineering, 21.02.2020 21:31 sophie2001sophie

An aluminum plate 4 mm thick is mounted in a horizontal position, and its bottom surface is well insulated. A special, thin coating is applied to the top surface such that it absorbed 90% of any incident solar radiation, while having an emissivity of 0.20. The density ? and specific heat C of aluminum are known to be 2,700 kg/m3 and 900 J/kg. oK, respectively. Consider conditions for which the plate is at a temperature of 25oC and its top surface is suddenly exposed to ambient air at T? = 20oC and to solar radiation that provides an incident flux of 1,000 W/m2. The convection heat transfer coefficient between the surface and the air is h = 25 W/m2.oK. Stefan-Boltzmann constant: ? = 5.67?10-8 W/m2.oK4.

1) The initial rate of change of the plate temperature is

2) Neglect heat loss by radiation, the steady state temperature of the plate is

3) Include heat loss by radiation, the steady state temperature of the plate is

4) Neglect heat loss by radiation,
the time it takes for the plate to reach 40oC is

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

An aluminum plate 4 mm thick is mounted in a horizontal position, and its bottom surface is well ins...

Questions