Engineering, 24.02.2020 17:00 alissalhenry

2. A concrete gravity dam has the following dimensions: Max water level = 305 m Bed level of river = 225 m, crest level = 309 m, D/S face slope starts at 300 m, D/S Slope= 2:3, C/L of drainage galleries at 8m d/s of u/s face, Uplift pressures: at Heal = 100 %, at Toe = 0 % at drainage gallery = 50 %. Assume density of concrete=2400kg/m3, no tail water, consider only self weight, hydrostatic and uplift pressure. Check the stability of dam for 1) rotation and overturning, 2) Translation and sliding, 3) overstress and material failure.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

You know the right answer?

2. A concrete gravity dam has the following dimensions: Max water level = 305 m Bed level of river =...

Questions