Engineering, 24.02.2020 17:33 carolinamleal04
"What is the difference between open-loop control and closed loop control?" How is the current state of fermentation estimated? How are these measurements fed into a control system? Check and see if you can find anything on the cost of a control system.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
"What is the difference between open-loop control and closed loop control?" How is the current state...
Mathematics, 22.01.2021 05:40
Mathematics, 22.01.2021 05:40
History, 22.01.2021 05:40
Chemistry, 22.01.2021 05:40
Mathematics, 22.01.2021 05:40
Mathematics, 22.01.2021 05:40
Biology, 22.01.2021 05:40
English, 22.01.2021 05:40