Engineering, 25.02.2020 22:31 TordtheMan982

Determine whether the following changes cause short-run aggregate supply curve to shift to the right, shift to the left, or remain unchanged. 1st attempt Part 1 (1 point)See Hint The price level increases. The short-run aggregate supply curve will Choose one: A. shift to the right. B. shift to the left. C. remain unchanged. Part 2 (1 point)See Hint Input prices decrease. The short-run aggregate supply curve will Choose one: A. shift to the right. B. shift to the left. C. remain unchanged. Part 3 (1 point)See Hint Firms and workers expect the price level to fall. The short-run aggregate supply curve will Choose one: A. shift to the right. B. shift to the left. C. remain unchanged. Part 4 (1 point)See Hint The price level decreases. The short-run aggregate supply curve will Choose one: A. shift to the right. B. shift to the left. C. remain unchanged. Part 5 (1 point)See Hint New policies cause an increase in the cost of meeting government regulations. The short-run aggregate supply will Choose one: A. shift to the right. B. shift to the left. C. remain unchanged.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Determine whether the following changes cause short-run aggregate supply curve to shift to the right...

Questions