subject
Engineering, 26.02.2020 04:15 destinywiggins75

You are designing footings for a foundation on a clayey soil. Determine the required footing width considering both short term (undrained) and long term (drained) bearing capacity for the conditions given below. Base your determinations on gross allowable bearing capacity. Soil Properties: (homogeneous sandy lean overconsolidated clay) undrained shear strength, Cu = 2,100 psf drained (effective stress) friction angle, '= 25 deg. drained (effective stress) cohesion intercept, c' = 300 psf total unit weight above the water table, y = 123 pcf saturated unit weight below the water table, Ysat = 128 pcf depth to water table = 2.5 ft Foundation Information: square footing vertical column load (at ground line), Pact = 150 kips depth of embedment, D = 2.5 ft unit weight of concrete, y = 150 pcf

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
You know the right answer?
You are designing footings for a foundation on a clayey soil. Determine the required footing width c...
Questions
question
English, 07.07.2019 04:10
question
Mathematics, 07.07.2019 04:10
Questions on the website: 13722367