subject
Engineering, 26.02.2020 06:02 priscillaoliver4487

Suppose you want to find the sum of two sinusoidal voltages, given as follows: v1(t)=V1 cos(ωt+ϕ1) and v2(t)=V2 cos(ωt+ϕ2)v1(t)=V1 cos(ωt+ϕ1) and v2(t)=V2 cos(ωt+ϕ2).

If you stay in the time domain, you will have to use trigonometric identities to perform the addition. But if you transform to the frequency domain, you can simply add the phasors V1V1 and V2V2 as complex numbers using your calculator. Your answer will be a phasor, so you will need to inverse phasor-transform it to get the answer in the time domain. This is an example of a problem that is easier to solve in the frequency domain than in the time domain.

Use phasor techniques to find an expression for v(t) expressed as a single cosine function, where v(t)=[100cos(300t+45∘)+500cos(300t− 60∘)] V. Enter your expression using the cosine function. Round real numbers using two digits after the decimal point. Any angles used should be in degrees.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
Suppose you want to find the sum of two sinusoidal voltages, given as follows: v1(t)=V1 cos(ωt+ϕ1) a...
Questions
Questions on the website: 13722361