Engineering, 26.02.2020 21:54 naomicervero
A cylindrical specimen of this alloy 12.7 mm in diameter and 250 mm long is stressed in tension and found to elongate 7.6 mm. On the basis of the information given, is it possible to compute the magnitude of the load that is necessary to produce this change in length? If so, calculate the load. If not, explain why.
Answers: 3
:
:
Another question on Engineering
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
A cylindrical specimen of this alloy 12.7 mm in diameter and 250 mm long is stressed in tension and...
Questions
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Business, 05.02.2021 20:30
Arts, 05.02.2021 20:30
English, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Spanish, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
Mathematics, 05.02.2021 20:30
