Engineering, 27.02.2020 03:18 rodriguezzamyy
If Mz = 38600 lb-ft, find the magnitude of the bending stress at a point H. For the beam cross section, assume b = 8.750 in. c = 3.500 in. d = 6.125 in. t = 0.875 in. The centroid of the cross section is located 3.25 in. above the bottom surface of the beam. The moment of inertia about the z axis is 107.3 in.4.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
You know the right answer?
If Mz = 38600 lb-ft, find the magnitude of the bending stress at a point H. For the beam cross secti...
Questions
Biology, 14.05.2021 02:10
Mathematics, 14.05.2021 02:10
Spanish, 14.05.2021 02:10
Mathematics, 14.05.2021 02:10
Mathematics, 14.05.2021 02:10
Mathematics, 14.05.2021 02:10
