Engineering, 27.02.2020 04:53 nayelycuencax

You get invited to a party at a 1,200 sf apartment, where there are a total of 23 people. The apartment has ceilings that are 8 ft above the floor. Three people begin smoking 2 cigarettes per hour each. The air handler system has a make-up air ventilation rate of 600 cfm. Assume an overhead fan ensures the air is well-mixed. Eye irritation from formaldehyde can start at concentrations of 0.01 ppm, with irritation of the lungs at 5 ppm. Will the concentrations become high enough to cause eye irritation

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

You know the right answer?

You get invited to a party at a 1,200 sf apartment, where there are a total of 23 people. The apartm...

Questions