Engineering, 27.02.2020 20:16 robert7248

Design a FSM to detect the sequence 101 into an input called x. The output z = 1 when the sequence has been detected and z = 0 otherwise. Detect the sequence continuously, also assume a Moore model is used to describe the output. Below you will find a set of input and output values you can use for testing purposes. x = 1001010100101 z = 0000010100001 You will need a debouncer for this circuit. I have performed this Google search, "verilog debouncer", and found several.

Create a Verilog program to describe the FSM given above. Use the state table to describe the FSM, then simulate, program the FPGA and test circuit for correctness.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Design a FSM to detect the sequence 101 into an input called x. The output z = 1 when the sequence h...

Questions