Engineering, 28.02.2020 04:00 postorivofarms
A Y-connected bank of three identical 100-kVA 9000/300-V2 transformers is supplied with power directly from a large constant-voltage bus. In the short-circuit test, the recorded values on the high-voltage side for one of these transformers are V_SC = 520 I_SC = 10 A P_SC-1 phi = 1100 W (a) If this transformer bank delivers a rated load at 0.88 PF lagging at rated voltage, what is the approximate line-to-line voltage on the primary of the transformer bank? (b) What is the voltage regulation under these conditions? (c) Assume that the primary line voltage of this transformer bank is a constant 520 V, and use Matlab to plot the secondary line voltage as a function of load current for currents from no-load to full-load at power factors of 0.85 lagging, 1.0, and 0.85 leading. Include print out of the Matlab plot and code with your homework. (d) Use Matlab to plot the voltage regulation of this transformer as a function of load current for currents from no-load to full-load at power factors of 0.85 lagging, 1.0, and 0.85 leading. Include a copy of Matlab plot and code with your homework.
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
A Y-connected bank of three identical 100-kVA 9000/300-V2 transformers is supplied with power direct...
Computers and Technology, 17.07.2019 12:30
Social Studies, 17.07.2019 12:30
Biology, 17.07.2019 12:30
Advanced Placement (AP), 17.07.2019 12:30
Biology, 17.07.2019 12:30
Mathematics, 17.07.2019 12:30
Biology, 17.07.2019 12:30
Biology, 17.07.2019 12:30
Biology, 17.07.2019 12:30
Biology, 17.07.2019 12:30
History, 17.07.2019 12:30
Biology, 17.07.2019 12:30
Chemistry, 17.07.2019 12:30