Engineering, 02.03.2020 20:08 gracieorman4

The length of industrial filters is a quality characteristic of interest. Thirty samples each of size 5, are chosen from the process. The data yield an average length of 110 mm, with the process standard deviation estimated to be 4mm.

(a) Find the warning limits for a control chart for the average length.

A.(115.58, 102.42) B.(114.58, 103.42) C.(113.58, 106.42) D. (112.58, 105.42)

(b) Find the 3 control limits. What is the probability of a type I error?

A.(114.37, 105.63) B.(115.37, 104.63) C. (116.37, 103.63)

(c) If the process mean shifts to 112 mm, what are the chances of detecting this shift by the third sample drawn after the shift?

A.6.76 % B.7.76 % C.8.76 % D.9.76 %

(d) What is the chance of detecting the shift for the first time on the second sample point drawn after the shift?

A.1.9%B.2.9 % C.3.9 % D. 4.9 %

(e) What is the ARL for a shift in the process mean to 112 mm?

A.31 B.32 C.33 D.34

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

You know the right answer?

The length of industrial filters is a quality characteristic of interest. Thirty samples each of siz...

Questions