subject
Engineering, 03.03.2020 00:44 hardwick744

The cutaway of the gun barrel shows a projectile moving through the barrel. The projectile’s exit speed is vs = 1650 m/s (relative to the barrel), the projectile’s mass is 18.5 kg, the length of the barrel is L = 4.4 m, the acceleration of the projectile down the gun barrel is constant, and θ is increasing at a constant rate of 0.18 rad/s.
Determine the following:
(a) The acceleration of the projectile.
(b) The pressure force acting on the back of the projectile.
(c) The normal force on the gun barrel due to the projectile.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
The cutaway of the gun barrel shows a projectile moving through the barrel. The projectile’s exit sp...
Questions
question
Chemistry, 04.02.2020 10:48
Questions on the website: 13722361