Engineering, 03.03.2020 01:19 sydneydavis57

A 1 m thick wall is made of concrete with a thermal conductivity of 1 W/m/K. There are temperature sensors on the wall’s surface and buried within the wall 1 cm from each surface. One set of temperature sensors shows the surface at 30 oC and the subsurface at 32 oC, while the other shows the surface at 40 oC and the subsurface at 35 oC. a. Is the wall heating up or cooling down? b. What’s the rate of change of thermal energy contained per unit area of wall? c. Would your answer change if the wall were 0.5 m thick?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

You know the right answer?

A 1 m thick wall is made of concrete with a thermal conductivity of 1 W/m/K. There are temperature s...

Questions