subject
Engineering, 03.03.2020 02:19 dezmondpowell

Show that for a perfect gas the Mach number at the nose of the Fanno line (friction and no heating) and at the nose of the Rayleigh line (heating and no friction) is unity. The nose of these lines, examples of which are given in Figs. 3.6 and 3.7, is defined by ds/dT = 0. If a duct is sufficiently long that frictional effects (with no heating) have driven the Mach number at exit to unity, what would happen to the flow rate if, without changing the upstream values of p 0 and T0, the length of pipe suddenly increased?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Show that for a perfect gas the Mach number at the nose of the Fanno line (friction and no heating)...
Questions
question
Social Studies, 27.07.2021 07:30
Questions on the website: 13722361