A spray-drying operation similar to that described in Problem 5.23 is used by the pharmaceutical industry. Acetaminophen is an active pharmaceutical ingredient (API) that can be produced in powdered form by spray drying. A mixture of the API containing 75 wt% water is fed to an atomizer in a dryer where it is brought into contact with hot air that enters the dryer at 220°C and 6.0 bar. All of the water is evaporated. The outlet gas contains 0.81 mole% water and leaves the dryer chamber at 80°C and 1.0 atm absolute with a flow rate of 513.6 m 3 / h 513.6m3/h. Calculate the production rate of powdered API and the volumetric flow rate of inlet air.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.