Engineering, 03.03.2020 04:23 Salas1333
Define the following leveling terms by matching the words given to the appropriate explanations in the sentences below:
(a) vertical line, (b) level surface, and (c) benchmark.
1. that follows the local direction of gravity as indicated by a plumb line
2. that at every point is perpendicular to the local plumb line (the direction in which gravity acts).
3. natural or artificial, having a marked point whose elevation above or below a reference datum is known or assumed.
Answers: 3
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Define the following leveling terms by matching the words given to the appropriate explanations in t...
Spanish, 13.01.2022 08:20
English, 13.01.2022 08:20
Social Studies, 13.01.2022 08:20
Social Studies, 13.01.2022 08:20
Mathematics, 13.01.2022 08:30
Physics, 13.01.2022 08:30
History, 13.01.2022 08:30
Mathematics, 13.01.2022 08:30
Mathematics, 13.01.2022 08:40
Mathematics, 13.01.2022 08:40