Engineering, 04.03.2020 03:04 johny144

A solid titanium alloy [G 114 GPa] shaft that is 720 mm long will be subjected to a pure torque of T 155 N m. Determine the minimum diameter required if the shear stress must not exceed 150 MPa and the angle of twist must not exceed 7?. Report both the maximum shear stress ? and the angle of twist ? at this minimum diameter. ?Part 1 where d is the shaft diameter. The polar moment of inertia is also a function of d. Find Incorrect. Consider the elastic tors on formula. The maximum shear stress occurs at the radial location ? = (d 2 the value of d for which the maximum shear stress in the shaft equals 150 MPa. Based only on the requirement that the shear stress must not exceed 150 MPa, what is the minimum diameter of the shaft? dr 16.1763 the tolerance is +/-2% Click if you would like to Show Work for this question: Open Show Work Attempts: 1 of 3 used SAVE FOR LATER SUBMIT ANSWER Part 2 Based only on the requirement that the angle of twist must not exceed 7°, what is the minimum diameter of the shaft?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

A solid titanium alloy [G 114 GPa] shaft that is 720 mm long will be subjected to a pure torque of T...

Questions