Engineering, 04.03.2020 21:47 MileenaKitana
Question 5 (Base excitation). An electronics module used to control a large crane must be isolated from the crane’s motion. The module weights 0.062 kg. (a) Design a spring isolator so that no more than 10% of the crane’s motion amplitude is transmitted to the module. The crane’s vibration frequency is 3000 rpm. (b) What is the maximum percentage of the crane’s motion that will be transmitted to the module if the crane’s vibration frequency ranges between 2500 and 3500 rpm?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
Question 5 (Base excitation). An electronics module used to control a large crane must be isolated f...
Questions
Mathematics, 14.02.2020 22:46
English, 14.02.2020 22:46
Mathematics, 14.02.2020 22:46
Biology, 14.02.2020 22:46
Mathematics, 14.02.2020 22:46
Biology, 14.02.2020 22:47
