Engineering, 05.03.2020 07:27 jothianddeepi

2. If you have 10 ft3 of an ideal gas stored at 75 F and at 12 psia that is expanded to 15 ft3 , what is the resulting pressure? 3. The atmospheric pressure is 14.3 psi. How many inches of mercury (s=13.6) does the National Weather Service report this pressure as? Pressure =

Answers: 2

Show answers

Answers

Answer from: lovelarissa

2. The decrease in pressure will be 8psia

3. The NWS will report the pressure to be 0.0657inchHg

Explanation:

2. This is an isothermal system because it was only the volume of the gas that was increased, and temperature was constant. To find the pressure, use the Boyle's law equation below.

P1V1 ÷ P2V2(1)

make P2 the subject of the formula

P2 = P1V1 ÷ V2 (2)

P1 = 12psia

V1 = 10ft3

V2 = 15ft3

Using equation 2

P2 = (12 × 10) ÷ 15 = 8psia

Therefore, the resulting pressure of the gas will decrease to 8psia, which obeys Boyle's law that states that pressure is inversely proportion to volume in a given mass of gas. That means, as volume increases pressure should decrease.

3. The National weather Service report, are the national agency that forecast the weather, to report how the climate will change. To report the pressure of a weather, their use a pressure barometer, and reports the reading in the pressure barometer, which is the hight the Mercury in the barometer increased to.

Using a pressure barometer.

Patm = pgh(3)

Make h the subject of formula

h = Patm ÷ pg (4)

Patm is the Atmospheric pressure = 4.3psi

p is the density of Mercury = 13.6

g is the force of gravity = 9.8

h is the hight of the Mercury in the barometer, which is the pressure that is measured.

Using equation 4

h = 4.3 ÷ (13.6 × 9.8) = 0.0322629psi

To convert Pound- force per square inch to inch of mecury (that's is psi to inchHg)

1psi = 2.03602inchHg

Therefore

0.0322629psi = 0.065689399inchHg

The NWS will report the pressure to be 0.0657inchHg

Answer from: Quest

Because if a good speech is delivered badly it can bore the audience, confuse them, or make them distrust the speakeri think they all come back to this one, except that last answer because that is false. if your audience starts making fun of you or gets distracted it is because they are either bored, confused or distrust you.

Answer from: Quest

The main difference between gui and cli is that the graphical user interface (gui) allows the user to interact with the system using graphical elements such as windows, icons, menus while the command line interface (cli) allows the user to interact with the system using commands

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

2. If you have 10 ft3 of an ideal gas stored at 75 F and at 12 psia that is expanded to 15 ft3 , wha...

Questions