Engineering, 05.03.2020 14:26 rleiphart1
A stainless-steel billet (6 in. diameter, 1 ft long) is passing through a 20-ft-long heat-treating furnace. The initial billet temperature is 200°F, and it must be raised to a minimum temperature of 1500°F before working. The heat-transfer coefficient between the furnace gases and the billet surface is 15 Btu/h ft2 °F, and the furnace gases are at 2300 °F. (a) (3 pts) Draw a schematic of the problem. (b) (2 pts) State assumptions if you need to make any (c) (20 pts) At what minimum velocity must the billet travel through the furnace to satisfy these conditions?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
A stainless-steel billet (6 in. diameter, 1 ft long) is passing through a 20-ft-long heat-treating f...
Questions
History, 11.02.2021 04:40
Mathematics, 11.02.2021 04:40
Social Studies, 11.02.2021 04:40
Mathematics, 11.02.2021 04:40
Social Studies, 11.02.2021 04:40
Chemistry, 11.02.2021 04:40
Social Studies, 11.02.2021 04:40
Spanish, 11.02.2021 04:40
Mathematics, 11.02.2021 04:40
Mathematics, 11.02.2021 04:40
Mathematics, 11.02.2021 04:40
